Do you need a DMR Id when connecting into the XLX gateway with YSF or D-STAR?

No, You do NOT need to have a valid DMR Id when connecting in to our gateway via YSF or D-STAR. We have designed our gateways to convert the ID’s to allow full traffic to pass regardless.

When would I need a proper DMR ID?

If you are connecting directly to any DMR gateway such as Brandmeister or connecting to us directly via DMR you will need a properly registered DMR Id. You can start that process by visiting here!

Do you have any sample code-plug’s available?

Sure, You can download sample code-plugs from the N2CID official code-plug repository here!

There are people copying these code plugs to post on there site for redistribution without asking, modifying them and damaging peoples radios. Please make sure you trust where you get your code-plugs from!

To donate any code-plugs please forward them to websupport@cidcomm.com. We will validate them and once approved they will be added to the REPO.

Do you offer internet access to Ham’s over DMR or D-STAR?

While in the past this has been done and tested, currently we do not due to legal reasons. Unless you have a commercial internet service with reseller permission it is illegal to connect any internet directly to DMR for re-use to the public. And yes the Carrier and the Feds will show up at your door lol. TRUST ME! 😉

Why do you route your DMR and DSTAR traffic over IPv6 versus IPv4?

While IPv6 has been around for quite some time, the world is just now starting to adopt its use more and more due to the shortage of IPv4 addresses available. We currently own and route thousands of IPv6 sub-nets over multiple ASN’s giving us millions of IPv6 addresses at our disposal. IPv6 being so new has nearly no congestion on networks and very minimal latency as compared to IPv4. Digital Radio technologies such as DMR require less than 700ms of latency which can be an issue on some larger networks however if you route that traffic over IPv6 instead it is a lot cleaner due to the way it routes and moves traffic via RA. On a small DMR network this isn’t such a big deal however when you want to route DMR over larger segments you want the traffic as clean as possible. There are also a lot more fancy features in IPv6 and RA that you can use in DMR/Digital networks such as these like better compression, roaming IP, and others.

Some people have HOT Mic’s (Really LOUD) or are really low and hard to hear on DMR. What can I do on my end to fix that?

Unfortunately there are so many brands of DMR radios out there its hard to have an actual standard. I personally use the 25% rule which is; your mic gain should be set so that most people can hear you perfectly with their volume knob set to 25% audio. This leaves room to lower the volume if needed but also allows a 75% increase of audio if you are somewhere really noisy say in a vehicle or crowd. This 25% rule seems to work quite well among the users on the system. Don’t be afraid to adjust your audio gain and get on the system and ask how it sounds. We’re all here to help and enjoy the hobby together!

What is linking or Clustering and how does it effect my Hot-Spot or Repeater?

Linking or Clustering is the ability to link a static Talk Group among many Hot-Spots and Repeaters in the area which help to extend the communication coverage of that Talk Group or (TG) for local Hams. Once you are linked in and you use your Dual-Radio Hot-Spot from anywhere in the world on TG:310441 you will still be connected to all the local repeaters in the area as if you never left. As an example lets say you travel to Florida for vacation and you have your Hot-Spot connected via your Hotel or Cellular Phone. Now you key up on TG:310441 and magically through the internet you are talking over the repeaters in Buffalo back to your friends and family locally!. The main N2CID Repeaters also support TMS Texting, Telemetry, GPS, GNSS Tracking (including Altitude, Lat, Long, Speed and Direction), APRS/DPRS Tracking and Messaging as a standard. Linking actual repeaters together helps with building the TG coverage map as well.

Why did you choose a BrandMeister only approach to Repeater linking?

To start I took a poll on our site over a period of three months and explained this ability and options and asked current users to vote on whether they would like these data features which are only available with using BrandMeister or would they prefer Voice only service on other networks. The vote was 28 to 1 for BM at the end of the poll and enabling the ability for them to use these extended features they were interested in so we took that approach.

Brandmeister is the only ham friendly group that allows full extended data routing across their network and endpoints versus just Voice. This gives us the ability to utilize linked routing of DMR data between repeater sites to include DMR IPv4/IPv6 encapsulated packet routing as well as TMS Texting, Telemetry, GPS, GNSS Tracking and messaging via APRS as mentioned above. Without this ability we would have none of those extra features for you as well as more in the future. We would be restricted to a Voice only service. We also back haul any traffic we cannot send over DMR directly between sites via an IPv6 mesh management tunnel.

How to link your DMR repeater or Hot-Spot to the N2CID DMR Repeater network.

As of 1/1/19 you can now reach the N2CID Network on DMR TG 310441 from any Repeater or Hotspot around the world. You can also reach us on D-STAR Reflector REF891C, XRF891C or DCS891C and Yaesu Fusion: Reflector 48010. For more information click here.